Mesh Rider Radio Wearable – Connector Descriptions (legacy)

Webpage to PDF

Pin Number	Direction	Voltage	Pin Description
A1, B1	-	GND	GND
A4, B4	-	+6V - +24V	Power. 6-24 V. USB-PD Compliant.
A5	I/O	0V - +5V	CC1. Required for USB-PD. DO NOT USE
B5	I/O	0V - +5V	CC2. Required for USB-PD. DO NOT USE
A9, B9	-	+6V - +24V	Power. 6-24 V. USB-PD Compliant.
A12, B12	-	GND	GND
A2, B2, A3, B3, A6, B6, A7, B7, A8, B8, A10, B10, A11, B11	-	-	No Internal Connection

Pin Number	Direction	Voltage	Pin Description
A1, B1	-	GND	GND
A4, B4	-	+5V 5-V Input
A6, B6	I/O	Diff signal	USB_D+. USB Slave port which supports Ethernet over USB only.
A7, B7	I/O	Diff signal	USB_D-. USB Slave port which supports Ethernet over USB only.
A9, B9	-	+5V	5-V Input
A12, B12	-	GND	GND
A2, B2, A3, B3, A5, B5, A8, B8, A10, B10, A11, B11	-	-	No Internal Connection

Pin Number	Direction	Voltage	Pin Description
1	O	+5-V	5-V, 1A Output
2	I/O	Diff signal	USB_D-. USB Host port. Must be twisted with GND
3	I/O	Diff signal	USB_D+. USB Host port. Must be twisted with GND
4	O	Diff Signal	ETH1_TX-
5	O	Diff Signal	ETH1_TX+
6	I	Diff Signal	ETH1_RX-
7	I	Diff Signal	ETH1_RX+
8	-	-	N.C.
9	I	0V - +VIN V	Power ON signal. Connected to a power push button. Peak voltage is equal to VIN which is rated up to 20 V.
10	-	GND	GND
11	I/O	0V - +3.3 V	GPIO1
12	O	0V - +3.3 V	UART_TX
13	I	0V - +3.3 V	UART_RX
14	-	GND	GND