This Hardware Integration Guide provides the information to facilitate smooth integration and use of the nano-OEM Mesh Rider Radio.
The nano-OEM Mesh Rider Radio is a small mesh radio, capable of switching between 6 operating bands for deploying Private Wireless Networks. It is available in many frequency bands between 900 MHz and 6 GHz. The nano-OEM radio integrates Doodle Labs' Mesh Rider technology.
Hardware Description
The nano-OEM has a primary connector which includes power, Ethernet, USB and UART ports. The interfaces are shown in Fig. 1.
Fig. 1 Wearable Mesh Rider Radio Overview
Port1. USB-Device port
Port2. Ethernet (ETH1) port
Port3. UART + RESET port
Port4. 5-V Power port
Port5. USB-Host port
Port6. 3x GPIO Port
ANT0. Meshrider Antenna port
Hardware Integration Notes
Power Supply Integration
Note that the nano-OEM Mesh Rider Radio requires a 5-V supply. See the datasheet for voltage tolerance. Exceeding the rated supply voltage can cause damage to the Mesh Rider Radio.
Additional Guidelines
The nano-OEM Mesh Rider Radio does not include galvanic isolation. Additional hardware Integration Guidelines can be be found on our Hardware Integration Guidelines page.