The battery pack is fully USB-PD compliant and also supports a standard 5-V to 15-V power supply, so it can be charged by a wide variety of chargers for cell phones, laptops and even the USB port of a vehicle. The battery pack uses a smart battery management system (BMS) which supports fast charging and is large enough to support several hours of continuous operation.
Model Number | BAT-W01-A |
Battery Capacity | 5000mAh @ 36Wh |
Cell Configuration | 2x 21700 Li-Ion cells in 2S1P configuration |
Output voltage | Nominal: 7.2 V Fully Charged: 8.4 V Discharge cutoff: 6.0 V |
Charging voltage/current | USB-PD Charger: 5V/3A (lowest priority), 12V/2A5, 15V/3A (highest priority) DC Power Supply: DC 5V ~ DC 15V |
Charging time to full capacity (without radio load) |
5-V Charging Voltage: 220 mins 12-V Charging Voltage: 125 mins 15-V Charging Voltage: 115 mins |
Temperature and relative humidity | Charging: 10 to 40℃, 60±25% R.H Discharging: -10 to 55℃, 60±25% R.H Storage: -5 to 35℃, 60±25% R.H |
Interfaces | Power ON/OFF Button 1x USB-C port (input only) 1x bi-color Green/Red LED indicator |
Operation Time
(start w/ full battery charge, no USB-C PD charger plugged in)
|
Max Usage: 3.5 hours typical (Wearable MR Radio RM-1700-22W3 @ 915MHz, Ch BW 20MHz, MCS8, Turbo ON, GPS OFF, WiFi OFF @ 25°C) Normal Usage: 5.2 hours typical (Wearable MR Radio RM-1700-22W3 @ 915MHz, Ch BW 20MHz, MCS0, Turbo OFF, GPS OFF, WiFi OFF @ 25°C) standby: 6.5 hours (Wearable MR Radio RM-1700-22W3 @ Standby mode @ 25°C) |
Storage leakage current | 4.5 mA typically |
Dimensions | 99.75mm x 63.0mm x 30.4mm |
Weight | 291 grams |
Ingress and resiliency | IP67 rated ingress protection MIL-STD-810H for vibration and shock |
USB-C PD Charger NOT plugged in | System is OFF |
Battery charging, USB-C PD Charger plugged in, Battery capacity < 5% | Fast blink RED LED |
Battery charging, USB-C PD Charger plugged in, 5% ≤ Battery capacity < 60% | Medium blink YELLOW LED |
Battery charging, USB-C PD Charger plugged in, 60% ≤ Battery capacity < 100% | Slow blink GREEN LED |
Battery fully charged, USB-C PD Charger plugged in, Battery capacity 100% | GREEN LED is SOLID ON |
Press PWR Button - ON mode | Solid YELLOW LED is ON and user shall hold the PWR button. Then solid GREEN LED is ON and user can release PWR button anytime then |
Press PWR Button - OFF mode | Solid RED LED is ON and user shall hold the PWR button. Then RED LED will go off and user can release PWR button anytime then |
Battery's temperature exceeds battery warm threshold or battery cool threshold | RED and GREEN LED blinks alternatively |
a. Battery's temperature exceeds battery hot threshold or battery cold threshold
|
RED LED blinks twice consecutively then GREEN LED blinks twice consecutively and repeat |
Detachment Protection | Auto power OFF battery box when the battery box is accidentally detached from Wearable MR radio during normal operation |
Preventive Power Cycling | Battery box will be forced to enter power OFF mode whenever there is no detection of Wearable MR radio even if the power ON button is pressed |
Forced Manual Shut Down | Battery box will be forced to enter power OFF mode in the event of long press of power button |