nano-OEM (Legacy) - 1x1 Multiband Mesh Rider Radio - Hardware Integration Guide

This Hardware Integration Guide provides the information to facilitate smooth integration and use of 1x1 Multiband Mesh Rider Radio.

Hardware Description

The 1x1 Multiband has a primary connector which includes power, Ethernet, USB and UART ports. The interfaces are shown in Fig. 1.


Fig. 1 Wearable Mesh Rider Radio Overview


a. ANT0 (MMCX)
b. Primary Connector

Hardware Integration Notes

Power Supply Integration

Note that the 1x1 Multiband Mesh Rider Radio requires a 5-V supply. See the datasheet for voltage tolerance. Exceeding the rated supply voltage can cause damage to the Mesh Rider Radio.

Additional Guidelines

The nano-OEM Mesh Rider Radio does not include galvanic isolation.

Additional hardware Integration Guidelines can be found on our Hardware Integration Guidelines page.